In our daily life, we often hear the saying "Safety first, prevention foremost", which shows that safety has become a very important social topic. Safety depends on the joint efforts of society and also on one's own ability to predict and prevent dangers. Only with thorough preparations can we prevent problems before they occur. No matter what we are doing or about to do, we must understand that safety is of Paramount importance. So, what important safety operation rules should be noted when conducting hardware processing? Now, let's have the editor introduce it to you all.

Important safety operation rules for metalworking:

1. Safety operation rules before entering metalworking

When conducting hardware processing, operators should maintain the correct posture and have sufficient energy. When operating, one must be fully concentrated, strictly refrain from chatting idly, and cooperate with each other. Operators must not operate when they are agitated or tired. For personal safety, to prevent accidents, and to ensure operational safety. All employees should check whether their clothing meets the job requirements before entering their posts. They should not wear slippers, high heels or clothing that may affect safety. Those with long hair should remember to wear safety helmets.

2. Safety operation rules that need to be checked before metalworking

Before the machine starts working, check whether the moving parts have been lubricated with oil. Then start the machine and check if the clutch and brake are functioning properly. Let the machine idle for 1 to 3 minutes. Do not operate the machine if there is any malfunction.

3. Safety operation rules that need to be noted in metalworking

During mechanical operation, it is strictly prohibited to insert hands into the working area of the slider. It is strictly forbidden to take or place workpieces by hand. When taking or placing workpieces in the die, tools that meet the standards must be used. If any abnormal sounds or malfunctions are detected in the machine, the power switch should be turned off immediately for inspection. After the machinery is started, only one person is allowed to transport materials and operate the machinery. Others are not permitted to press the power switch or step on the foot switch board. For the safety of others, it is strictly forbidden to put hands into the working area of the machinery or touch the moving parts of the machinery with hands.

4. Safety operation rules to be noted when starting machinery

The power must be turned on and the machinery started only after all other personnel have left the mechanical working area and removed the debris on the workbench.

5. Safety operation rules to be noted when changing molds

When changing the die, first turn off the power supply. Only after the moving part of the press stops running can the installation and debugging of the die begin. After the installation and adjustment are completed, manually move the flywheel to test punch twice. To avoid unnecessary collisions between the machinery and the product to be processed, it is necessary to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are tight, and whether the blank holder is in a reasonable position.